FIREPLACELAB
Get a quote
Menu
Find your cityOptions & costsField guideExplore options & pricing
A freestanding wood-burning stove heating a finished living room

Wood stove installation in Sandy, Utah

Salt Lake County / south Salt Lake Valley. Heat your home, even when the power goes out: the permit, the local rules, and who installs here.

Explore options & pricingSee Sandy installers
Free to request · No obligation to hire
Photograph · Clay Banks / Unsplash

In Salt Lake County, wood burning is banned on winter air action days unless you hold an exemption, including during most outages. Details below.

By FireplaceLab · Sources checked · Research standards

Before you install in Sandy.

I

Permits go through Sandy Cityworks

Sandy’s Building & Code Compliance Division takes permit applications and inspection requests through its online Cityworks portal.

Local details
II

Voluntary days are no-burn days

Salt Lake County Regulation #35 bans burning on voluntary and mandatory action days from November 1 to March 1, after a burn-down period.

Local details
III

Two stove showrooms in Sandy

Alpine Fireplaces (10665 South State) and Comfort Solutions (8451 Sandy Parkway) both list Sandy showrooms that carry wood stoves.

Local details

The coldest month here, January, has a 1991–2020 normal of 30.4°F at the COTTONWOOD WEIR, UT station. One station is a planning reference, not a reading for every address. NOAA station normals

Local businesses to contact directly

Wood stove installers in Sandy.

Compare installation providers and nearby showrooms. Check service coverage and assessment fees directly, or request help finding an installer.

  1. I

    Alpine Fireplaces

    Sales & installation · Sandy showroom at 10665 South State, on the west frontage road of I-15; serves the Salt Lake Valley
    Wood stovesWood insertsInstallation

    Its Sandy page says Alpine serves Salt Lake Valley homeowners with products ‘from gas fireplaces to wood stoves’ from its Sandy location, displays over 25 units, and ‘can make, install, or provide service’. Its wood-stove page names the Sandy showroom. Ask which wood stoves are EPA certified and whether it pulls the Sandy permit.

    View business & contact detailsClassic wood stovesWebsite reviewed Sep 29, 2026 · Not contacted by FireplaceLab
  2. II

    Comfort Solutions Fireplaces

    Sales & installation · Showroom at 8451 Sandy Parkway; also West Haven; names Sandy in its service list
    Wood stovesWood insertsFireplace installation

    Its site says it can design and install fireplaces, offers freestanding wood stoves and wood inserts, and calls its Sandy showroom its newest and largest. Its stove page shows a Jøtul wood stove and gives the Sandy Parkway address. It is also a heating and cooling company. Confirm the model is EPA certified and who handles the Sandy permit.

    View business & contact detailsGas and wood stoves pageWebsite reviewed Sep 29, 2026 · Not contacted by FireplaceLab
  3. III

    Hearth and Home Distributors of Utah

    Sales & installation · Sugar House showroom (973 E 2100 S, Salt Lake City) is its nearest fireplace showroom; names Sandy and Salt Lake County
    Wood stovesStove installationStove repair

    Its Salt Lake County page lists wood stoves among its services and says its contractors design and install stoves and gas inserts and repair all types of fireplaces and stoves. Sandy appears in its list of cities served. The page does not name wood stove models. Ask which EPA-certified wood stoves it installs and whether it handles the Sandy permit.

    View business & contact detailsWebsite reviewed Sep 29, 2026 · Not contacted by FireplaceLab
  4. IV

    SLC Chimney Sweep

    Chimney service & installation · Says it is based in Lehi; its service list names Sandy; no street address shown
    Wood stove installationChimney linersChimney sweeping

    Its wood-stove page names Sandy among the cities it serves and describes installs with a stainless liner, block-off plate and stovepipe, including the permit and final inspection where required. It lists a Utah contractor license number and says it has served the area since 2026. Verify the license and confirm the stove you choose is EPA certified.

    View business & contact detailsWebsite reviewed Sep 29, 2026 · Not contacted by FireplaceLab

Unpaid listings, shown alphabetically. Website research is not contractor vetting or confirmation of a partnership. Confirm qualifications and insurance before hiring.

Details your installer can help confirm

Wood stove permits in Sandy.

Sandy’s Building & Code Compliance Division issues the permit.

Sandy says a building permit is required for all construction in the city, including installing, altering or replacing any mechanical system regulated by the code. The Building & Code Compliance Division is at City Hall, 10000 Centennial Parkway, Room 210, and applications go through the city’s Cityworks portal. Its permit list does not name wood stoves or fireplaces; the closest type is the residential mechanical permit, whose sheet covers HVAC, gas lines and other mechanical alterations. The city lists the 2021 IRC and 2024 IMC as adopted codes. Ask which permit type fits a stove or insert and what it wants for the listing, clearances, hearth and chimney.

Sandy City: Building Permits

Read this first: winter burning is restricted on action days.

Salt Lake County Health Regulation #35 (adopted 2015) applies in Sandy. From November 1 through March 1 it bans burning solid fuel on both voluntary and mandatory action days set by Utah’s Division of Air Quality, after a burn-down period of up to three hours. Registered sole-source homes are exempt. A temporary sole-source exemption may be granted if the regular heating system fails, but it is not automatic, so ask the county before counting on a stove during an outage.

Salt Lake County Health Regulation #35, Solid Fuel Burning (PDF, adopted 2015)

Who to ask about burning rules and exemptions.

Salt Lake County’s Health Department says its Air Quality Bureau regulates wood and other solid-fuel burning in the county, while Utah’s Division of Air Quality handles most other sources. The bureau is in the Environmental Health Division at 788 East Woodoak Lane in Murray, and the page lists phone and email contacts and a way to report illegal burning. Sandy residents should ask it how a temporary exemption is requested before winter.

Salt Lake County Health Department: Sources of Air Pollution

Buying a stove? It must be EPA certified.

Utah Admin. Code R307-302-6 says no person shall sell, offer for sale, supply, install or transfer a wood burning stove that is not EPA certified, and the rule covers all of Salt Lake County. An uncertified stove installed before March 6, 2014 may transfer with a house in a sale if it stays in place. The rule also requires seasoned wood and bans burning garbage, plastic and treated wood.

Utah Admin. Code R307-302, Solid Fuel Burning Devices

This is a planning guide, not a permit determination. The local authority and your installer must confirm current requirements for your property and appliance. We have not verified project-specific approvals or fees.

Choose the right project

Wood stoves and fireplace inserts in Sandy.

Freestanding wood stove in a bright living room
INew stove or replacement

Install a wood-burning stove.

An enclosed stove with a chimney system designed for your home. An installer assesses placement, venting, and the space you want to heat.

About wood stoves
Existing fireplace illustrating a hearth to assess for an insert
IIExisting fireplace

Explore a fireplace insert.

Use a suitable existing fireplace as the starting point. Have the opening, chimney, and liner assessed for the proposed insert.

About inserts

Can you install a wood stove without a chimney?

A new wood stove can sometimes be installed with a new chimney system. Ask a Sandy-area provider to assess a suitable route and quote the complete job. Installation without an existing chimney

Want heat during a power outage?

Many cordwood stoves provide heat without electricity. Ask about your exact model, any powered blower, and the rooms it can heat. Read the power-outage heating guide

Room photographs illustrate project starting points; they are not installations completed through FireplaceLab.

Understand the full installed cost

Wood stove installation costs in Sandy.

U.S. planning ranges to prepare for a Sandy quote. They are national estimates, not measured Sandy averages or offers from listed businesses.

Freestanding wood stove$2,500–$7,500
Wood-burning insert$3,000–$8,000+
New installation, no chimney$5,500–$9,000+

Unit and typical installation ranges from HomeGuide’s national cost guide, reviewed Sep 28, 2026. These are alternative project scenarios, not amounts to add together. Repairs, access, venting, permits, and premium models can move costs higher.

What to ask a Sandy installer.

  1. Which Sandy permit type will you apply for through Cityworks, and will you schedule the inspections?
  2. Is this stove EPA certified under Utah’s R307-302 rule, and will you give me the certification paperwork?
  3. Do you know how Salt Lake County’s Air Quality Bureau handles a temporary exemption when a furnace fails?

Compare quotes on the same scope.

Request separate details for the appliance, chimney or liner, hearth work, labor, removal, permits, inspections, and exclusions. Confirm any paid assessment before booking.

Will you save on heating?

There is no reliable single savings figure for every Sandy home. Compare your current heating cost with delivered dry wood, appliance efficiency, how much heat you will replace, maintenance, and the upfront installation. Backup comfort and financial payback are separate decisions. Compare all heating options

Answers before you request a quote

Sandy wood stove installation FAQs.

Can I use a wood stove in Sandy during a winter power outage?

Not automatically. From November 1 to March 1, Salt Lake County bans burning on voluntary and mandatory action days. Regulation #35 says a temporary sole-source exemption may be granted if the oil, gas, electric or propane heating system fails. Ask the county Air Quality Bureau how to request it ahead of winter; this guide cannot promise it will be granted.

Does Sandy require a permit for a wood stove?

Sandy requires a permit for all construction, including installing any mechanical system regulated by the code, and takes applications through its Cityworks portal. Its permit list does not name wood stoves, so ask the Building & Code Compliance Division at City Hall which permit type applies and what documents it needs.

What if a wood stove is my only heat?

Utah’s R307-302 lets a home burn on mandatory no-burn days only if the solid-fuel device is the sole source of heat for the whole residence and registered with the Division of Air Quality. Salt Lake County’s Regulation #35 also exempts registered sole-source homes. A house with a working furnace does not qualify.

What FireplaceLab does

Explore your options. Then get a quote for your home.

  1. I

    Answer two simple questions

    Tell us what’s there now and what you want from wood heat. No contact details needed.

  2. II

    See options and rough costs

    Explore a suitable starting point and national installed cost ranges.

  3. III

    Request a local quote

    When you’re ready, share your home details. We’ll look for an installer to assess the job and quote the work.

FireplaceLab is an installer-matching service. Your installer handles the assessment, quote, and installation. A request does not book work or guarantee a match.

Wood stove installation · Sandy, Utah

Get a plan and a price for your home.

Tell us where you live and what you want to install. We’ll look for a local professional to assess the work.

Explore options & pricing
More about UtahFuel, upkeep & responsible wood heatHow this guide was researched